The Receive from GPS command allows you to copy all of the waypoints, routes, and/or tracks from your GPS receiver to EasyGPS.
To receive data from your GPS, do one of the following:
- On the , click .
- Click the
Receive from GPS button on the main toolbar. - Right-click on a blank spot on the map. On the , click .
The Receive from GPS dialog will appear. Check the box next to the kinds of GPS data you want to receive from your GPS, and click OK.
The Progress dialog will appear and show the time remaining for the GPS transfer.
After the GPS transfer is complete, your GPS data has been added to the file.
If an Error Occurs:
- Read GPS Transfer Errors.
- Turn the GPS off and back on again to reset the GPS interface before attempting any further GPS actions.
